Original Tile in Older Central Austin Homes
Clay liners installed before World War II crack at the joints as the house settles and the flue heats and cools. In older central-Austin homes it is the most common finding on the camera.
Licensed & Insured 5-Star Rated Camera Scan First
Chimney Liner Replacement in Austin, TX — See the Damage Before You Pay.
Camera-verified relining for Austin masonry and prefab chimneys. A cracked liner is the one finding that makes a chimney unsafe to use. We scan the flue on camera, show you the footage, and reline only what needs relining.
- Camera Footage Shown
- Liner Sized to the Appliance
- Written Price Before Work
- 10% Hero Discount
Request Service
Get Your Free Chimney Estimate
Fill in your details and we'll get back to you about your chimney — wherever you're located in our service areas.
Insulated stainless liners
Furnace & water heater liners
Camera scan before & after
Top plate, cap & crown work
Local Expertise
Relining Chimneys in Austin
Austin housing runs from 1930s bungalows in Hyde Park with original clay-tile flues to 1990s and 2000s suburban builds in Circle C and Cedar Park with factory-built fireplaces. The two need completely different work, and that is the single biggest reason we camera-inspect before quoting anything.
For masonry chimneys we install insulated stainless liners sized to the appliance. For factory-built units we replace the listed pipe components the manufacturer requires. Either way you see the footage of your own flue first, and the price is in writing before work starts.
Warning Signs
What We Find Inside Austin Flues
The liner is the part of the chimney you can never see from the room — and the part that keeps heat and combustion gases away from your home's framing.
Rusted Factory Pipe in Suburban Builds
Prefab fireplaces installed in the 1990s and 2000s are reaching the end of their service life. Rusted pipe and a corroded firebox are not repairable with a generic liner.
Debris Damage From the Tree Canopy
Live oak and cedar elm debris in an uncapped flue traps moisture against the liner, accelerating corrosion and mortar breakdown.
Camera scans booked this week
Don't Guess What's Inside Your Flue
Tell us what you're seeing — tile pieces, a failed inspection, a smoke smell. We scan the flue, show you the footage, and quote only what it needs.
Prefer to send details?
Share what you're seeing and we'll contact you to confirm the right next step.
Send My Chimney DetailsFree written estimates · No obligation
What We Install
Liners Sized, Insulated and Sealed Correctly
Insulated Stainless Steel Relining
A continuous stainless liner sized to the appliance, wrapped in insulation where clearance requires it, running from the appliance connection to the top plate — no joints inside the chimney to leak.
Furnace & Water Heater Liners
Correctly sized liners for gas appliances still venting into an old masonry flue, which fixes both the condensation damage and the weak draft that caused it.
Top Plate, Cap & Crown Work
The reline is finished with a sealed top plate and cap so water cannot get between the liner and the masonry. Crown repair is quoted in the same estimate when it is needed.
Camera Scan Before and After
We record the condition of the flue before we quote and after we finish, so you see exactly what you paid for instead of taking someone's word for it.
How It Works
From Camera Scan to a Safe Flue
1. Tell Us What's Going On
Failed inspection, tile pieces in the firebox, smoke smell, a home sale deadline — tell us and we book the camera scan.
2. Camera Scan the Flue
A camera goes the full length of the flue. You see the footage and the actual condition of the liner before any price is discussed.
3. Size the Liner
The liner is sized to the appliance and the flue — not guessed. Wrong-size liners cause draft problems that are worse than the original issue.
4. Written Price First
You get the liner type, insulation, top-plate work and total price in writing before we order anything.
5. Install & Verify
The liner is installed, connected, sealed at the top, and re-scanned. You get photos and footage of the finished flue.
Honest Pricing, No Fake Numbers
Nobody can quote a reline over the phone without knowing the flue height, diameter, insulation requirement and appliance. Anyone who does is guessing — and the guess usually rises once they are on site. We scan first, then give one written price that does not move.
If the scan shows your liner is sound, we tell you so. A reline you do not need is the most expensive repair there is.
5-Star Rated
What Homeowners Say About Us
5.0 average rating
Serving Austin, Texas and the surrounding area
“Very professional from start to finish. The inspection was thorough, they showed me photos of everything, and the cleaning was spotless — no mess left behind. Fair price too.”
Sarah K.
Chimney Inspection & Cleaning · Austin, TX · 1 month ago
“Water was coming in around our chimney every time it rained. Captain found the cracked crown and bad flashing, explained everything clearly, and fixed it in one visit. Not a drop since.”
Michael R.
Chimney Leak Repair · San Antonio, TX · 2 weeks ago
“Our 90-year-old brick chimney was crumbling. The tuckpointing work is beautiful — it looks brand new but still matches the house perfectly. True craftsmen.”
David & Anna T.
Tuckpointing & Masonry Repair · Houston, TX · 1 month ago
Liner FAQs
Answers Before You Commit to a Reline
Got an inspection report you don't understand? Call and read it to us — we'll tell you plainly what it means.
(682) 217-3577It depends on the flue height, the liner diameter, whether insulation is required and what appliance it serves. A short furnace liner and a full insulated fireplace reline are very different jobs. We scan the flue first and give a written price before ordering anything.
The reliable answer comes from a camera scan of the flue. Common clues are pieces of clay tile in the firebox, a smoke or gas smell, a failed Level 2 inspection, or a furnace that back-drafts. Visible cracks and open joints on camera confirm it.
A quality stainless liner, correctly sized and installed, typically lasts decades and is usually sold with a long manufacturer warranty. Thin or wrongly sized liners fail early, which is why sizing and material matter more than price.
No. A cracked liner lets heat and combustion gases reach combustible framing behind the masonry, and it is one of the few findings that make a chimney unsafe to use until it is corrected.
Often yes. Modern high-efficiency gas furnaces and water heaters vented into an oversized old masonry flue produce condensation that destroys tile and mortar. A correctly sized liner solves the draft and the damage.
Most straightforward relines are done in a day once the correct liner is on hand. Unusual flue sizes, offsets and factory-built components may need an ordering window, which we tell you about after the scan.
Yes — 10% off for military, veterans, seniors 65+, police, firefighters and EMTs. Mention it when you call (682) 217-3577.
Metal firebox walls with visible seams and refractory panels usually mean factory-built; solid brick or stone laid in mortar means masonry. We confirm it on site — the answer changes what can legally be installed.
There is no blanket requirement, but a Level 2 inspection during a sale routinely flags a cracked liner, and buyers ask for it to be corrected. Handling it before listing keeps it out of the negotiation.
Find Out What's Really Inside Your Chimney
One camera scan, one honest answer, one written price. Call now and we'll get you on the schedule.